Use app

>>Class 12
>>Physics
>>Electrostatic Potential and Capacitance
>>Effects of Dielectrics in Capacitors
>> $Basic Knowledge of Effect o...$

Basic Knowledge of Effect of Dielectric on Capacitance of Parallel Plate Capacitor

Q: A parallel plate capacitor is charged by a battery, which is then disconnected. A dielectric slab is then inserted in the space between the plates. Explain what changes, if any, occur in the values of (i) capacitance.(ii) potential difference between the plates.(iii) electric field between the plates.(iv) the energy stored in the capacitor.

\$(i)\$ The capacitance increases as the dielectric constant \$K > 1\$. \$(ii)\$ Potential difference \$V =\dfrac{Q}{C}\$. As \$C\$ increases and \$Q\$ remains the same since the battery is disconnected, the p.d. between the plates decreases.\$(iii)\$ Electric field \$E =\dfrac{V}{d}\$ where \$V\$ is the p.d. and \$d\$ the separation between the plates. As \$V\$ decreases and d remains the same, electric field also decreases.\$(iv)\$ Energy stored in a capacitor \$U =\dfrac{1}{2}\dfrac{{Q}^{2}}{C}\$. As \$Q\$ is constant and \$C\$ increases, \$U\$ decreases.

Q: A parallel plate capacitor with air between the plates has a capacitance of 8 pF (1pF =\$ 10^{-12}\$ F). What will be the capacitance if the distance between the plates is reduced by half, and the space between them is filled with a substance of dielectric constant 6?

\$\textbf{Step 1: Initial capacitance} \$Let the initial distance between the plates be \$d.\$Let \$A\$ be the area of each plate.Capacitance of the parallel plate capacitor is given by: \$C_i = \dfrac{A\in_0}{d} \$ \$....(1)\$\$\textbf{Step 2: Capacitance after inserting dielectric} \$Let \$k\$ be the dielectric constant. \$C_f = \dfrac{kA \in_0}{d'}\$As the distance between plates is reduced to half, new distance is \$d' = \dfrac{d}{2}\$ \$\therefore C_f = \dfrac{2kA\in_0}{d}= 2kC_i= 2\times 6\times 8pF= 96pF\$

Q: The capacitance of a parallel plate capacitor with air as medium is \$6 \mu F\$. With the introduction of a dielectric medium, the capacitance becomes \$30\mu F\$. The permittivity of the medium is :\$(\in_0= 8.85 \times 10^{-12} C^2N^{-1} m^{-2})\$

Capacitance of air capacitor \$C_0 = \dfrac{\varepsilon_0A}{d} = 6 \mu F\$ ......... (i)When a dielectric of permittivity \$\varepsilon_r\$ and dielectric constant K is introduced between the plates, thenCapacitance, \$C = \dfrac{K \varepsilon_0 A}{d} = 30 \mu F\$ ..... (ii)Dividing eq. (ii) by (i), we get\$\dfrac{C}{C_0} = \dfrac{\dfrac{K\epsilon_o A}{ d}}{\dfrac{\varepsilon_0 A}{d}} = \dfrac{30}{6}\$\$\Rightarrow K = 5\$\$\therefore\$ permittivity of the medium\$\varepsilon_0 = \varepsilon_0 K\$\$= 8.85 \times 10^{-12} \times 5 = 0.44 \times 10^{-10}\$

Q: A slab of material of dielectric constant K has the same area as that of the plates of a parallel plate capacitor but has the thickness d/2, where d is the separation between the plates. Find out the expression for its capacitance when the slab is inserted between the plates of the capacitor .

Hint:- Write the expression of potential difference between the plates when the slab is inserted and hence find capacitance by using the formula,\$c=\frac{q}{v}\$Step 1: Write the expression of capacitance before the slab is inserted.Initially, when there is a vacuum between the two plates, the capacitance of the capacitor is \${ C }_{ 0 }=\dfrac { { \varepsilon }_{ 0 }A }{ d } \$where A is the area of parallel plates Suppose that the capacitor is connected to a battery, an electric field \${ E }_{ 0 }\$ is producedStep 2: Write the expression of potential difference after the slab is inserted between the plates of the capacitor if we insert the dielectric slab of thickness t=d/2 the electric field is reduced to ENow, the gap between plates is divided in two parts, for distance t=\$\frac d2\$there is electric field E and for the remaining distance (d-t) the electric field is \${ E }_{ 0 }\$ If V be the potential difference between the plates of the capacitor, then\$V={ E }_{ t }+{ E }_{ 0 }(d-t)\\ V=\dfrac { Ed }{ 2 } +\dfrac { { E }_{ 0 }d }{ 2 } =\dfrac { d }{ 2 } (E+{ E }_{ 0 })\quad \quad \quad \quad (t=\dfrac { d }{ 2 } )\$ \$V=\dfrac { d }{ 2 } (\dfrac { { E }_{ 0 } }{ K } +{ E }_{ 0 })=\dfrac { d{ E }_{ 0 } }{ 2K } (K+1)\quad \quad \quad \quad (\quad as\quad \dfrac { { E }_{ 0 } }{ E } =K)\$\$now\quad { E }_{ 0 }=\dfrac { \sigma }{ { \varepsilon }_{ 0 } } =\dfrac { q }{ { \varepsilon }_{ 0 }A } \\ \Rightarrow V=\dfrac { d }{ 2K } \dfrac { q }{ { \varepsilon }_{ 0 }A } (K+1)\$ Step 3:Calculate capacitance after dielectric slab is inserted.\$C=\frac {q}{V}\$\$C= \dfrac {2K\epsilon_o A }{d(k+1)}\$

Q: A parallel plate capacitor is charged by a battery.The battery is disconnected and a dielectric slab is inserted to completely fill the space between the plates. How will (i) its capacitance, (ii) electric field between the plates and (iii) energy stored in the capacitor be affected ? Justify your answer giving necessary mathematical expressions for each case.

The capacitance without dielectric is \$C=\dfrac{A\epsilon_0}{d}\$When dielectric slab is inserted, the capacitance becomes, \$C'=\dfrac{AK\epsilon_0}{d}=KC\$ where K be the dielectric constant. i)Thus, the capacitance will increase K times of the initial.ii) As the battery is disconnected so the charge on capacitor remains constant.Since, \$Q=CV\$ so potential V will decrease and also \$E=V/d\$ so the field E will also decrease.iii) Stored energy, \$U=\dfrac{Q^2}{2C}\$ . As charge Q is constant and \$C\$ is increasing so energy will decrease.

Q: A slab of material of dielectric constant K has the same area as the plates of a parallel plate capacitor but has thickness \$3d/4\$, where d is the distance between plates. How is the capacitors changed when the slab is inserted between the plates?

\$C = \cfrac{A \epsilon_0}{d}\$\$C' = \cfrac{A \epsilon_0}{d - t + \cfrac{t}{k}}\$Put \$t = \cfrac{3d}{4}\$ ;\$C' = \cfrac{4k}{3 + k} . \cfrac{A \epsilon_0}{d}\$\$C' = \cfrac{4k}{3 + k} . C\$

Q: A parallel plate capacitor is made of two dielectric blocks in series. One of the blocks has thickness \$d_{1}\$ and dielectric constant \$K_{1}\$ and the other has thickness \$d_{2}\$ and dielectric constant \$K_{2}\$ as shown in figure. This arrangement can be thought as a dielectric slab of thickness d (=\$d_{1}+d_{2}\$) and effective dielectric constant K. The K is

The capacities of two individual condensers are\${ C }_{ 1 }=\cfrac { { K }_{ 1 }{ \varepsilon }_{ 0 }A }{ { d }_{ 1 } } ;{ C }_{ 2 }=\cfrac { { K }_{ 2 }{ \varepsilon }_{ 0 }A }{ { d }_{ 2 } } \$The arrangement is equivalent to two capacitors joined in series\$\therefore\$ Equivalent capacitance, \$\cfrac { 1 }{ { C }_{ eq } } =\cfrac { 1 }{ { C }_{ 1 } } +\cfrac { 1 }{ { C }_{ 2 } } =\cfrac { { d }_{ 1 } }{ { K }_{ 1 }{ \varepsilon }_{ 0 }A } +\cfrac { { d }_{ 2 } }{ { K }_{ 2 }{ \varepsilon }_{ 0 }A } \$\$=\cfrac { 1 }{ { \varepsilon }_{ 0 }A } \left[ \cfrac { { d }_{ 1 } }{ { K }_{ 1 } } +\cfrac { { d }_{ 2 } }{ { K }_{ 2 } } \right] =\cfrac { 1 }{ { \varepsilon }_{ 0 }A } \left[ \cfrac { { { K }_{ 2 }d }_{ 1 }+{ K }_{ 1 }{ d }_{ 2 } }{ { K }_{ 1 }+{ K }_{ 2 } } \right] \$or \${ C }_{ eq }={ \varepsilon }_{ 0 }A\left( \cfrac { { K }_{ 1 }+{ K }_{ 2 } }{ { { K }_{ 2 }d }_{ 1 }+{ K }_{ 1 }{ d }_{ 2 } } \right) ....(i)\quad \$Also \${ C }_{ eq }=\cfrac { K{ \varepsilon }_{ 0 }A }{ { d }_{ 1 }+{ d }_{ 2 } } \$From (i) and (ii) \$\quad \quad { \varepsilon }_{ 0 }A\left( \cfrac { { K }_{ 1 }+{ K }_{ 2 } }{ { { K }_{ 2 }d }_{ 1 }+{ K }_{ 1 }{ d }_{ 2 } } \right) ={ \varepsilon }_{ 0 }A\left( \cfrac { K }{ { d }_{ 1 }+{ d }_{ 2 } } \right) \$\$\therefore K=\cfrac { { K }_{ 1 }{ K }_{ 2 }\left( { d }_{ 1 }+{ d }_{ 2 } \right) }{ { K }_{ 1 }{ d }_{ 2 }+{ { K }_{ 2 }d }_{ 1 } } \$

Q: A parallel-plate capacitor of area A, plate separation d and capacitance C is filled with four dielectric materials having dielectric constants \$k_1, k_2, k_3\$ and \$k_4\$ as shown in the figure below. If a single dielectric material is to be used to have the same capacitance C in this capacitor, then its dielectric constant k is given by

Hint:- Use series and parallel combination to find out equivalent capacitance of arrangement of a capacitor with different dielectrics and hence equate it to the capacitance of a capacitor filled with single dielectric.Step 1: Write the capacitance of all parts of capacitor filled with dielectricsLet \$C_1\$,\$C_2\$,\$C_3\$ and \$C_4\$ are the capacitance of parts of the capacitor filled with dielectric constant \$k_1\$, \$k_2\$,\$k_3 \$and \$k_4\$\$C_1=\dfrac{(A/3)k_1\epsilon_0}{d/2}=\dfrac{2k_1}{3k}C\$, \$C_2=\dfrac{(A/3)k_2\epsilon_0}{d/2}=\dfrac{2k_2}{3k}C\$, \$C_3=\dfrac{(A/3)k_3\epsilon_0}{d/2}=\dfrac{2k_1}{3k}C\$, \$C_4=\dfrac{(A)k_4\epsilon_0}{d/2}=\dfrac{2k_4}{k}C\$Step 2: Calculate equivalent capacitance of arrangement The above three capacitors \$C_1, C_2, C_3\$ are in parallel and then it is in series with \$C_4\$ Now the equivalent capacitance for the combination of four capacitors is \$1/C_{eq}=1/(C_1+C_2+C_3)+1/C_4\$ or \$1/C_{eq}=\dfrac{3k}{2C}[\dfrac{1}{k_1+k_2+k_3}]+\dfrac{k}{2k_4C}\$ Step 3:Equating this equivalent capacitance to the capacitance of capacitor filled with single dielectric\$C=C_eq\$\$\dfrac {1}{C}\$=\$\dfrac{1 }{C_eq}\$ (Put \$C=\dfrac{k\epsilon_oA}{d}\$)or \$\dfrac{2}{k}=\dfrac{3}{k_1+k_2+k_3}+\dfrac{1}{k_4}\$

Q: A parallel plate air capacitor is charged to a potential difference of V volts. After disconnecting the charging battery the distance between the plates of the capacitor is increased using an insulating handle. As a result the potential difference between the plates:

Capacitance \$C=\varepsilon\dfrac{A}{d}\$ , \$A-area\ of\ the\ capacitor\ ; d-distance\ between\ the\ plates\$For a charged capacitor \$Q=CV\$As the distance between the plates of the capacitor is increased the capacitance \$C\$ decreases \$\ \ \ (\because C \propto \dfrac{1}{d})\$ As capacitance decreases the potential difference between the plates \$V \ increases\$

Physics

formula

Parallel plate capacitor with a dielectric

The capacitance

C

of a parallel plate capacitor with single dielectric slab between plates is :

C = \frac{K ϵ _{0} A}{d} = K C_{0}

where

C_{0}

is the capacitance without the dielectric.

definition

Parallel plate capacitor

A parallel plate capacitor consists of two large plane parallel conducting plates separated by a small distance.

REVISE WITH CONCEPTS

Electric Displacement

ExampleDefinitionsFormulaes

LEARN WITH VIDEOS

Capacitance of the parrallel plate capacitor with dielectric slab

13 mins

Parallel plate capacitor with dielectric in series and parallel

11 mins

Parallel plate capacitor with dielectric of different thickness

12 mins

Quick Summary With Stories

Capacitance of the Parallel Plate Capacitor with Dielectric Slab

2 mins

Relation between dielectric constant and suspectibility, Dielectric strength

2 mins

Important Questions

A parallel plate capacitor is charged by a battery, which is then disconnected. A dielectric slab is then inserted in the space between the plates. Explain what changes, if any, occur in the values of
(i) capacitance.
(ii) potential difference between the plates.
(iii) electric field between the plates.
(iv) the energy stored in the capacitor.

Hard

View solution

A parallel plate capacitor of area A, plate separation d and capacitance C is filled with three different dielectric materials having dielectric constants $K_{1}, K_{2}, K_{3}$ as shown. If a single dielectric material is to be used to have the same capacitance C in this capacitor then its dielectric constant K is given by

Medium

View solution

A parallel plate capacitor with air between the plates has a capacitance of 8 pF (1pF = $1 0^{- 12}$ F). What will be the capacitance if the distance between the plates is reduced by half, and the space between them is filled with a substance of dielectric constant 6?

Medium

View solution

The capacitance of a parallel plate capacitor with air as medium is $6 μ F$ . With the introduction of a dielectric medium, the capacitance becomes $30 μ F$ . The permittivity of the medium is :
$(\in_{0} = 8.85 \times 1 0^{- 12} C^{2} N^{- 1} m^{- 2})$

Medium

View solution

A slab of material of dielectric constant K has the same area as that of the plates of a parallel plate capacitor but has the thickness d/2, where d is the separation between the plates. Find out the expression for its capacitance when the slab is inserted between the plates of the capacitor .

Hard

View solution

A parallel plate capacitor is charged by a battery.
The battery is disconnected and a dielectric slab is inserted to completely fill the space between the plates.
How will (i) its capacitance, (ii) electric field between the plates and (iii) energy stored in the capacitor be affected ? Justify your answer giving necessary mathematical expressions for each case.

Medium

View solution

A slab of material of dielectric constant K has the same area as the plates of a parallel plate capacitor but has thickness $3 d / 4$ , where d is the distance between plates. How is the capacitors changed when the slab is inserted between the plates?

Medium

View solution

A parallel plate capacitor is made of two dielectric blocks in series. One of the blocks has thickness $d_{1}$ and dielectric constant $K_{1}$ and the other has thickness $d_{2}$ and dielectric constant $K_{2}$ as shown in figure. This arrangement can be thought as a dielectric slab of thickness d (= $d_{1} + d_{2}$ ) and effective dielectric constant K. The K is

Hard

View solution

A parallel-plate capacitor of area A, plate separation d and capacitance C is filled with four dielectric materials having dielectric constants $k_{1}, k_{2}, k_{3}$ and $k_{4}$ as shown in the figure below. If a single dielectric material is to be used to have the same capacitance C in this capacitor, then its dielectric constant k is given by

Hard

View solution

A parallel plate air capacitor is charged to a potential difference of V volts. After disconnecting the charging battery the distance between the plates of the capacitor is increased using an insulating handle. As a result the potential difference between the plates:

Medium

View solution

formula

Parallel plate capacitor with a dielectric

definition

Parallel plate capacitor

REVISE WITH CONCEPTS

Electric Displacement

Quick Summary With Stories

Capacitance of the Parallel Plate Capacitor with Dielectric Slab

Relation between dielectric constant and suspectibility, Dielectric strength

A parallel plate capacitor with air between the plates has a capacitance of 8 pF (1pF =10−12 F). What will be the capacitance if the distance between the plates is reduced by half, and the space between them is filled with a substance of dielectric constant 6?

The capacitance of a parallel plate capacitor with air as medium is 6μF. With the introduction of a dielectric medium, the capacitance becomes 30μF. The permittivity of the medium is : (∈0​=8.85×10−12C2N−1m−2)

A slab of material of dielectric constant K has the same area as that of the plates of a parallel plate capacitor but has the thickness d/2, where d is the separation between the plates. Find out the expression for its capacitance when the slab is inserted between the plates of the capacitor .

A slab of material of dielectric constant K has the same area as the plates of a parallel plate capacitor but has thickness 3d/4, where d is the distance between plates. How is the capacitors changed when the slab is inserted between the plates?

A parallel plate air capacitor is charged to a potential difference of V volts. After disconnecting the charging battery the distance between the plates of the capacitor is increased using an insulating handle. As a result the potential difference between the plates:

A parallel plate capacitor with air between the plates has a capacitance of 8 pF (1pF = $1 0^{- 12}$ F). What will be the capacitance if the distance between the plates is reduced by half, and the space between them is filled with a substance of dielectric constant 6?

The capacitance of a parallel plate capacitor with air as medium is $6 μ F$ . With the introduction of a dielectric medium, the capacitance becomes $30 μ F$ . The permittivity of the medium is :
$(\in_{0} = 8.85 \times 1 0^{- 12} C^{2} N^{- 1} m^{- 2})$

A slab of material of dielectric constant K has the same area as the plates of a parallel plate capacitor but has thickness $3 d / 4$ , where d is the distance between plates. How is the capacitors changed when the slab is inserted between the plates?