play-icon

Current and Voltage in Series and Parallel Circuits

4 MinsPhysics
audioIcon

Language

smileIcon

Rate

NEXT VIDEOS

REVISE WITH CONCEPTS

Combination of Resistors - Problem L1

ExampleDefinitionsFormulaes

Combination of Resistors - Problem L2

ExampleDefinitionsFormulaes

Combination of Series and Parallel Resistors

ExampleDefinitionsFormulaes

QUICK SUMMARY WITH STORIES

Important Questions

A piece of wire of resistance is cut into five equal parts. These parts are then connected in parallel. If the equivalent resistance of this combination is , then the ratio is - 

View solution
>

For two resistor and , connected in parallel, find the relative error in their equivalent resistance, if and

View solution
>

How many resistors (in parallel) are required to carry 5A on a 220V line?

View solution
>

A wire of resistance 'R' is cut into 'n' equal parts. These parts are then connected in parallel with each other. The equivalent resistance of the combination is?

View solution
>

An electric current is passed through a circuit containing two wires of the same material, connected in parallel. If the lengths and radii of the wires are in the ratio of and , then the ratio of the currents passing through the wire will be

View solution
>

A 20 volts ac is applied to a circuit consisting of a resistance and a coil with negligible resistance. If the voltage across the resistance is 12V the voltage across the coil is going to be

View solution
>

A wire of resistance 5 ohm is bend in the form of closed circle. What is the resistance between 2 points at the ends of any diameter of the circle? 

View solution
>

Two wires of same metal have the same length but their cross-sections are in the ratio 3:1. They are joined in series. The resistance of the thicker wire is . The total resistance of the combination is:

View solution
>

Find the equivalent resistance between A and B.

811543
expand
View solution
>

A ring is made of a wire having a resistance . Find the points and as shown in figure, at which a current carrying conductor should be connected, so that the resistance of the sub circuit between these points is equal to

799479
expand
View solution
>