Q: In the circuit shown in the figure.I)Would any of the bulb glow when the switch is in the 'OFF' position?II) What will be the order in which the bulbs A, B and C will glow when the switch is moved to the 'ON' position?

\$I)\$ No, none of the bulbs will glow when the switch is the off position as the circuit won't be completed when the switch will be in the off state.\$II)\$ All the bulbs will glow at once because all the bulbs are connected with the same battery and they are being controlled by the same switch.

Q: Name a device that helps to maintain a potential difference across a conductor.

\$\textbf{Explanation}\$\$\bullet\$Potential difference is the difference of electrical potential between two points which is defined as the amount of work energy is required to move an electric charge from one point to another.\$\bullet\$An electric cell or battery helps to maintain a potential difference across a conductor.\$\bullet\$The cells only provide the energy required to work on the charge in order to transport it from the negative to the positive terminal. \$\bullet\$The cell can sustain an electric potential difference across the two ends of the external circuit by giving energy to the charge.

Question 1

Identify the circuit (Figure 12.3) in which the electrical components have been properly connected

Accepted Answer

Hint: Check the connections of the Voltmeter and Ammeter.Step 1: Checking if the Voltmeter is connected in parallel and Ammeter is connected in series.   In circuits $(i)$ and $(iii)$, Voltmeter is connected in series. In circuit $(iii)$ the ammeter is connected in parallel. In circuits $(i)$ and $(iii)$, connections are not proper. In circuits $(ii)$ and $(iv)$, the Voltmeter and Ammeter are connected in parallel and series respectively. Step 2: Checking if the terminals are connected properly.   In circuit $(iv)$, the positive terminal of the ammeter is connected with the negative terminal of the cell. Hence it is not proper. Whereas in circuit $(ii)$, all the terminals are properly connected. Therefore option $(B)$ is the correct option.

Question 2

When a switch is in OFF position,
i) Circuit starting from the positive terminal of the cell stops at the switch.
ii) Circuit is open.
iii) No current flows through it.
iv) Current flows after some time.
Choose the combination of correct answer from the following.

Accepted Answer

When the switch of a circuit is in off position, the circuit will remain open and in this condition, the current does not flow through the circuit.So, option (II) and (III) are correct.

Question 3

A rheostat is used in an electrical circuit

Accepted Answer

A rheostat is a variable resistor which is used to control current. they are able to vary the resistance in circuit without interruption. the construction of a rheostat is very similar to potentiometer .Thus A rheostat is used in circuit to change the resistance of the circuit. so option correct is A.

Question 4

In the circuit shown in the figure.I)Would any of the bulb glow when the switch is in the 'OFF' position?II) What will be the order in which the bulbs A, B and C will glow when the switch is moved to the 'ON' position?

Accepted Answer

$I)$ No, none of the bulbs will glow when the switch is the off position as the circuit won't be completed when the switch will be in the off state.$II)$ All the bulbs will glow at once because all the bulbs are connected with the same battery and they are being controlled by the same switch.

Question 5

A switch is an on-off device in an electric circuit.

Accepted Answer

An electrical switch is any device used to interrupt the flow of electrons in a circuit. Switches are essentially binary devices: they are either completely on (&#8220;closed&#8221;) or completely off (&#8220;open&#8221;).

Question 6

Name a device that helps to maintain a potential difference across a conductor.

Accepted Answer

$\textbf{Explanation}$$\bullet$Potential difference is the difference of electrical potential between two points which is defined as the amount of work energy is required to move an electric charge from one point to another.$\bullet$An electric cell or battery helps to maintain a potential difference across a conductor.$\bullet$The cells only provide the energy required to work on the charge in order to transport it from the negative to the positive terminal. $\bullet$The cell can sustain an electric potential difference across the two ends of the external circuit by giving energy to the charge.

Question 7

The main function of a switch is to

Accepted Answer

A switch is a device that is used for making and breaking electric current in a circuit. It is used to turn on and turn off daily used equipment like television, washing machine, fan, light, etc.

Question 8

When the two terminals of a battery are connected directly with a wire then:

Accepted Answer

When the two terminals of a battery are connected directly with a wire there will be a low resistance path for the current to flow. The wire will get heated a little bit (depends on the diameter of the wire less the diameter more heat) and the battery will be quickly discharged. During depletion, it may become very hot, emit gasses, and possibly explode. The shorting wires will draw heavy current that may melt the wire or even cause them to soften and break.

Question 9

Where should we place the key or switch in the electric circuits?

Accepted Answer

The key or Switch can be placed anywhere in the electric circuit.

Question 10

What is symbol of battery?

Accepted Answer

First option is the symbol of battery. The short and longer bar represent the negative and positive terminals respectively of each cell in the battery.Answer-(A)

Electric Cell

Language

Rate

REVISE WITH CONCEPTS

Battery

QUICK SUMMARY WITH STORIES

Battery

Identify the circuit (Figure 12.3) in which the electrical components have been properly connected

When a switch is in OFF position,
i) Circuit starting from the positive terminal of the cell stops at the switch.
ii) Circuit is open.
iii) No current flows through it.
iv) Current flows after some time.
Choose the combination of correct answer from the following.

A rheostat is used in an electrical circuit

In the circuit shown in the figure.
I)Would any of the bulb glow when the switch is in the 'OFF' position?
II) What will be the order in which the bulbs A, B and C will glow when the switch is moved to the 'ON' position?

A switch is an on-off device in an electric circuit.

Name a device that helps to maintain a potential difference across a conductor.

The main function of a switch is to

When the two terminals of a battery are connected directly with a wire then:

Where should we place the key or switch in the electric circuits?

What is symbol of battery?

Electric Cell

Language

Rate

REVISE WITH CONCEPTS

Battery

QUICK SUMMARY WITH STORIES

Battery

Identify the circuit (Figure 12.3) in which the electrical components have been properly connected

When a switch is in OFF position, i) Circuit starting from the positive terminal of the cell stops at the switch.ii) Circuit is open.iii) No current flows through it.iv) Current flows after some time.Choose the combination of correct answer from the following.

A rheostat is used in an electrical circuit

In the circuit shown in the figure.I)Would any of the bulb glow when the switch is in the 'OFF' position?II) What will be the order in which the bulbs A, B and C will glow when the switch is moved to the 'ON' position?

A switch is an on-off device in an electric circuit.

Name a device that helps to maintain a potential difference across a conductor.

The main function of a switch is to

When the two terminals of a battery are connected directly with a wire then:

Where should we place the key or switch in the electric circuits?

What is symbol of battery?

When a switch is in OFF position,
i) Circuit starting from the positive terminal of the cell stops at the switch.
ii) Circuit is open.
iii) No current flows through it.
iv) Current flows after some time.
Choose the combination of correct answer from the following.

In the circuit shown in the figure.
I)Would any of the bulb glow when the switch is in the 'OFF' position?
II) What will be the order in which the bulbs A, B and C will glow when the switch is moved to the 'ON' position?