Solve
Guides
0
You visited us 0 times! Enjoying our articles? Unlock Full Access!
Standard XI
Physics
NCERT
Question

Answer the following:
(a) You are given a thread and a metre scale. How will you estimate the diameter of the thread?
(b) A screw gauge has a pitch of 1.0mm and 200 divisions on the circular scale. Do you think it is possible to increase the accuracy of the screw gauge arbitrarily by increasing the number of divisions on the circular scale?
(c) The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is a set of 100 measurements of the diameter expected to yield a more reliable estimate than a set of 5 measurements only?

Open in App
Solution
Verified by Toppr

(a) Wrap the thread on a uniform smooth rod in such a way that the coils thus formed are very close to each other. Measure the length of the thread using a metre scale. The diameter of the thread is given by the relation,
Diameter = Length of rod/Number of turns
(b) It is not possible to increase the accuracy of a screw gauge by increasing the number of divisions of the circular scale. Increasing the number of divisions of the circular scale will increase its accuracy to a certain extent only.
(c) A set of 100 measurements is more reliable than a set of 5 measurements because random errors involved in the former are very less as compared to the latter.

Was this answer helpful?
25
Similar Questions
Q1
Answer the following:
(a) You are given a thread and a metre scale. How will you estimate the diameter of the thread?
(b) A screw gauge has a pitch of 1.0mm and 200 divisions on the circular scale. Do you think it is possible to increase the accuracy of the screw gauge arbitrarily by increasing the number of divisions on the circular scale?
(c) The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is a set of 100 measurements of the diameter expected to yield a more reliable estimate than a set of 5 measurements only?
View Solution
Q2
Answer the following : (a)You are given a thread and a metre scale. How will you estimate the diameter of the thread ? (b)A screw gauge has a pitch of 1.0 mm and 200 divisions on the circular scale. Do you think it is possible to increase the accuracy of the screw gauge arbitrarily by increasing the number of divisions on the circular scale ? (c) The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is a set of 100 measurements of the diameter expected to yield a more reliable estimate than a set of 5 measurements only ?
View Solution
Q3

The pitch of a screw gauge is 1 mm and there are 100 division on the circular scale. A students measures a diameter of a wire using this screw gauge and he gets main scale reading as 5 mm and circular divisions as 25. If the screw gauge has positive zero error 0.03mm, the correct value of diameter will be


View Solution
Q4

While performing an experiment with a screw gauge to measure the diameter of a wire, a student finds that when the two jaws of the screw gauge are in contact with each other, the zero of the circular scale lies 5 divisions above the line of graduation. The pitch of the screw gauge is 1 mm and has 100 divisions on its circular scale. While measuring the diameter of the wire, 4 linear scale divisions are clearly visible while 63rd division on the circular scale coincides with the reference line. What is the diameter of the wire?

View Solution
Q5
The pitch of a screw gauge is 2 mm and there are 100 divisions on the circular scale. In measuring the diameter of a sphere, there are 6 divisions on the linear scale and 40 divisions on circular scale coinciding with the reference line. The diameter of the sphere is:
View Solution