0
You visited us 0 times! Enjoying our articles? Unlock Full Access!
Question

Figure shows a series LCR circuit connected to a variable frequency 230 V source. L = 5.0 H, C = 80 μF, R = 40Ω.
(a) Determine the source frequency which drives the circuit in resonance.

(b) Obtain the impedance of the circuit and the amplitude of current at the resonating frequency.

(c) Determine the rms potential drops across the three elements of the circuit. Show that the potential drop across the LC combination is zero at the resonating frequency.


420469_51354c1568004fca822b63442ad87c32.PNG

Solution
Verified by Toppr

(a)
The resonance frequency is given by
ω=1LC=15×80×106=50rad/s
The resonant frquency is 50 rad/s.

(b)

At resonance, ωL=1/ωC

Z=R=40Ω

The peak voltage, Vo=2V

Io=2V/Z

Io=8.13A

(c)

Potential drop across inductor,

VL(rms)=I×ωRL

I=I0/2=2V/2Z=23/40 A

Vrms=1437.5V

Potential drop across capacitor,

(Vc)rms=I×1wrC=1437.5V

Potential drop across resistor,

(VR)rms=I×R=230V

Potential drop across the LC combination

VLC= I(XL-XC)

at resonance XL=XC VLC=0 V

Was this answer helpful?
55
Similar Questions
Q1
Figure shows a series LCR circuit connected to a variable frequency 230 V source. L = 5.0 H, C = 80 μF, R = 40Ω.
(a) Determine the source frequency which drives the circuit in resonance.

(b) Obtain the impedance of the circuit and the amplitude of current at the resonating frequency.

(c) Determine the rms potential drops across the three elements of the circuit. Show that the potential drop across the LC combination is zero at the resonating frequency.


420469_51354c1568004fca822b63442ad87c32.PNG
View Solution
Q2
Figure 7.21 shows a series LCR circuit connected to a variable frequency 230 V source. L = 5.0 H, C = 80μF, R = 40 W. (a) Determine the source frequency which drives the circuit in resonance. (b) Obtain the impedance of the circuit and the amplitude of current at the resonating frequency. (c) Determine the rms potential drops across the three elements of the circuit. Show that the potential drop across the LC combination is zero at the resonating frequency.
View Solution
Q3
Keeping the source frequency equal to the resonating frequency of the series LCR circuit, if the three elements, L, C, and R are arranged in parallel, show that the total current in the parallel LCR circuit is minimum at this frequency. Obtain the current RMS value in each branch of the circuit for the elements and source specified as below for this frequency.

The figure shows a series LCR circuit connected to a variable frequency 230V source. L=5.0H, C=80 μF, R=40Ω.


420635_179979727db5443e975933634c49cc46.png
View Solution
Q4
The figure show a series LCR circuit with L=5.0H,C=80μF,R=40Ω connected to variable frequency 240 V source. Calculate
(i)The angular frequency of the source which driver the circuit at resonance
(ii) The current at the frequency.
(iii)The rms potential drop across the capacitor at resonance
491954.png
View Solution
Q5
The figure shows a series LCR circuit with L=54H,C=80μF,R=40Ω connected to a variable frequency 240V source, calculate
(i) the angular frequency of the source which drives the circuit at resonance,
(ii) the current at the resonating frequency,
(iii) the rms potential drop across the inductor at resonance.
501368.jpg
View Solution