Here, 10 and 20 ohm resistance are short circuit and no current will flow through these resistance.
so, Req=50Ω
I=VR=1050=0.2A=200mA (A is correct)
Power=VI=10×0.2=2W (B is correct)
Therefore only C option is incorrect because Current from X to Y is 0.2A.
Was this answer helpful?
0
Similar Questions
Q1
In the circuit shown, Table 1 Table - 2 (a) Potential difference across battery A (p) A (b) Potential difference across battery B (q) B (c) Power is supplied by battery (r) 14V (d) Power is consumed by battery (s) 9V (t) none
View Solution
Q2
In the circuit shown in figure the power supplied by 10 V battery is_______ the power supplied by 10 V battery is_______ the power dissipated in 3Ω resistance is________
View Solution
Q3
A bulb is connected to a battery of potential difference 4 V and internal resistance 2.5 Ω. A steady current of 0.5 A flows through the circuit. The total energy supplied by the battery in 10 minutes is :
View Solution
Q4
In 10 second a charge of 25 c leaves a battery and 200j of energy are delivered to outside circuit as a result, what is potencial difference across battery and what current flows from battery.
View Solution
Q5
The total current supplied to the circuit by the battery as shown in figure is