Reading and using of statement of scale, graphic scale and scale of representation
2

Open in App

Solution

Verified by Toppr

Was this answer helpful?

Similar Questions

A vernier caliper has no zero error, one main scale division =

1 mm

and

9

main scale division =

10

vernier scale divisions. A spring is held between jaws without exerting force on jaws. Main scale reading is

3.4 cm

, and 5th vernier scale division coincides with a main scale division. When jaws are pressed by force of

10 N

on both sides, main scale reading remains

3.4 cm

, but 1st division of vernier scale coincides with a main scale division. Now spring is removed, cut into two pieces and when inserted between jaws without any force, main scale reading =

1.1 cm

and 5th vernier scale division coincides with a main scale. If we apply force of

30 N

on both the jaws, main scale reading gets

1.0 cm

and

x

vernier scale division coincides with a main scale division. Find

^{'} x^{'}

View Solution

If zero of the vernier scale lies between 2.0 cm and 2.7 cm on main scale,then main scale reading is

View Solution

A spectrometer gives the following reading when used to measure the angle of a prism.
Main scale reading : 58.5 degree
Vernier scale reading : 09 divisions
Given that 1 division on main scale corresponds to 0.5 degree. Total divisions on the vernier scale is 30 and match with 29 divisions of the main scale. The angle of prism from the above data is

View Solution

A spectrometer gives the following reading when used to measure the angle of a prism. Main scale reading $= 58.5 °$ , Vernier scale reading $9$ division. Given that, $I$ division on main scale corresponds to $0.5 °$ . Total division on the vernier scale is $30$ and match with $29$ divisions of the main scale. The angle of the prism from the above data is

View Solution

A spectrometer gives the following reading when used to measure the angle of a prism. Main scale reading: 58.5 degree, Vernier scale reading : 9 divisions. Given that 1 division on main scale corresponds to 0.5 degree. Total divisions on the vernier scale is 30 and match with 29 divisions of the main scale. The angle of the prism from the above data:

View Solution

Reading and using of statement of scale, graphic scale and scale of representation2

Reading and using of statement of scale, graphic scale and scale of representation
2